Product Showcase – 17.5 Part 2

Product Showcase – 17.5 Part 2

AUTOMETER A-PILLER GAUGE POD FOR JEEP JK

Autometer are proud to introduce their Jeep JK replacement pillar pods. These latest additions to their Jeep mounting solution category provide a factory level of fit and finish to your specific vehicle application. The pillar pods are engineered to place the gauges in the driver's line of sight and are built to withstand the vigor of off-road racing or anything you can throw at them on the street. Keeping the interior aesthetics of your vehicle proper and monitoring the important vitals are certain necessities you don't want to skip out on. The new Jeep JK replacement pillar pods will keep you looking OEM and give you the piece of mind you deserve when putting your vehicle through extreme conditions.

The kit features the replacement gauge pillar with oil pressure and transmission temperature gauges and assorted mountings and senders. Built from ruggedized ABS material, it puts up with the harshest environments and fits without cutting or drilling. Gauges feature a factory-like appearance with LED through-the-dial illumination and superior gauge accuracy keeps you informed about critical conditions.

Part Number: 7041 - Price: $244.31 USD - www.autometer.com

LONGFIELD GUN DRILLED 30-SPLINE 4340 CHROMOLY BIRFIELDS

The Longfield Gun Drilled 30-Spline Birfields are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the birfield are also made from 4340 chromoly and are dual heat treated for superior strength. The birfield has a M8 grease zerk at the end of the stub shaft and is gun drilled through the center of the birfield to allow for grease to pass through the zerk fitting and into the internals. This will save you precious time by eliminating the need to disassemble your axle just to service your birfields.

The Gun Drilled 30-Spline Birfields also have a shallow relief near the splines on the stub shaft known as a Machined Spline Saver. The Machined Spline Saver eliminates stress concentrations caused by grooving from the tool that makes the splines on the stub shaft. The stress concentration from the spline groove is a common failure point on birfield stub shafts. The axle shafts are also made out of 4340 chromoly steel.

Trail Gear understand that once you upgrade your axles, the next weak link is your hub gears, so they decided to include their Chromoly Inner and Outer Hub Gears and Creeper Drive Flanges at no additional cost.

Part Number: 301475-1-KIT - Price: $299.95 USD - www.trail-gear.com

NEW PRO COMP LEVEL LIFT KIT FOR COLORADO AND CANYON

Pro Comp is proud to announce the release of the Level Lift system for the all-new 2015+ Chevrolet Colorado and GMC Canyon. Pro Comp’s Level Lift system is an affordable way to achieve the additional clearance needed to fit larger wheels and tire combinations on the new mid-sized GM pickups without negatively affecting the factory suspension or steering geometry. The precision engineered leveling system installs on top of the factory strut to maintain OE ride and handling characteristics. Like all Pro Comp products, the Pro Comp Promise, Lifetime Warranty, backs this Level Lift system.

Part Number: 63162K - Price: $299.99 USD - www.procompusa.com

INNOVATIVE CREATIONS ADDS HIDDEN WINCH TO F-150

ICI is now offering a Hidden Winch Mounting Kit for 2009-2014 Ford F-150 trucks. This expands the products line from 2010-2014 Ford Raptor trucks to now include the standard F-150s as well. This new Hidden Winch Kit fits securely in the factory front bumper and allows for the placement of either a 10k or 12k recovery winch in the center space behind the front bumper. The ¼-in plate steel winch mount easily installs above the factory skid plate and utilizes existing factory holes for installation. The Hidden Winch Kit comes with a Hawse Fairlead filler plate to close off the open area around the centre opening of the bumper giving it a flush design, and leaving only the fairlead and tow hook exposed. Unlike other winch mounting solutions, this kit can be easily installed by one person and does not require the winch to be installed to the mounting plate before installing on the vehicle. This product is made in the U.S.A. and comes with a one-year warranty on the finish, and a lifetime warranty on the structure.  

Part Number: HWCH002FD (Ford F-150), HWCH001FD (Raptor) - Price: NA - 1-623-486-2300